Xantrex Freedom EX 4000, Руководство по установке

Страница: 39 / 52

Basic Installation Procedures
975-0998-01-01 37
Step 7: Connecting to Port(s) on the
Freedom EX 4000
Figure 22 Freedom EX 4000 Ports
1 2 3 4 6 5
1 20-pin CC (communications and control) port
2 RV-C ports
3 Sync ports
4 USB port
5 Remote port
6 BTS port
NOTICE
EQUIPMENT DAMAGE
Do not use pinouts (see Figure 25 ) that are designated "DO NOT
USE" to connect to equipment not currently supported.
Failure to follow these instructions can result in equipment
damage.
NOTICE
EQUIPMENT DAMAGE
Use the USB port only for firmware upgrades. Do not use for
powering or charging USB devices.
Failure to follow these instructions may void the warranty and
damage equipment.
Connecting to the 20-pin Communications
and Control (20-pin CC) Port
The 20-pin CC port of the Freedom EX 4000 accepts a
corresponding Communications and Control 20-pin Harness
(see
Figure 23 ). For marine vessels, the NMEA 2000 protocol
for marine communication systems will be introduced as an
added capability in upcoming releases.
Figure 23 20-pin Communications Harness
Figure 24 20-pin Communications Harness Pinouts
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
1 DO NOT USE yellow
2 ACC_ON/OFF grey
3 GND black
4 AIR_TEMP orange
5 GND black
6 GND black
7 DO NOT USE violet
8 DO NOT USE white/red
9 AUX_IN_POS white/blue
10 AUX_IN_NEG blue
20 AUX_RLY1_DRY_NC grey
19 AUX_RLY1_DRY_COM brown
18 AUX_RLY1_DRY_NO grey
17 AUX_RLY2_DRY_NC white
16 AUX_RLY2_DRY_COM grey
15 AUX_RLY2_DRY_NO white/violet
14 AUX+ 12V (200mA) red
13 DO NOT USE black
12 DO NOT USE white/green
11 DO NOT USE white/black
Figure 25 I/O Port
20 19 18 17 16 15 14 13 12 11
AUX_
RLY1_
DRY_
NC
AUX_
RLY1_
DRY_
COM
AUX_
RLY1_
DRY_
NO
AUX_
RLY2_
DRY_
NC
AUX_
RLY2_
DRY_
COM
AUX_
RLY2_
DRY_
NO
AUX+
12V
(200mA)
DO NOT
USE
DO NOT
USE
DO NOT
USE
10 9 8 7 6 5 4 3 2 1
AUX_IN_
NEG
AUX_IN_
POS
DO NOT
USE
DO NOT
USE
GND GND AIR_
TEMP
GND ACC_
ON/OFF
DO NOT
USE