Xantrex Freedom EX 4000, Руководство по установке

Страница: 5 / 52

975-0998-01-01 3
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, BURN,
OR ARC FLASH
n
Apply appropriate personal protective equipment (PPE)
and follow safe electrical work practices. See NFPA 70E or
CSA Z462.
n
This equipment must only be installed and serviced by
qualified electrical personnel.
n
Turn off all power supplying this equipment before working
on or inside equipment.
n
Always use a properly rated voltage sensing device to
confirm power is off.
n
Replace all devices, doors, and covers before turning on
power to this equipment.
n
Batteries can present a risk of electrical shock, high short-
circuit current, and exposure to gasses and chemicals.
n
Observe the following precautions when working with
batteries: • Remove watches, rings, or other metal objects;
• Keep sparks and flames away from batteries; • Use tools
with insulated handles; • Do not lay tools or other metal
parts on top of batteries.
n
Servicing of batteries must only be performed by qualified
personnel knowledgeable of batteries and the required
precautions. Keep unqualified personnel away from
batteries.
n
Disconnect the charging source prior to connecting or
disconnecting battery terminals.
n
Never attempt to charge a frozen battery.
Failure to follow these instructions will result in death or
serious injury.
WARNING
FIRE AND EXPLOSION HAZARD
n
Unit’s components may produce arcs or sparks.
n
Do not install near batteries, in machinery space, or in an
area in which ignition-protected equipment is required.
n
For indoor use only.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
Areas include any space containing gasoline-powered machinery,
fuel tanks, as well as joints, fittings, or other connections between
components of the fuel system.
WARNING
HEAVY EQUIPMENT
Always use proper lifting techniques during handling and
installation. A two-person lift is required to prevent personal
injury.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
WARNING
ELECTRICAL SHOCK HAZARD
n
Replace the wiring compartment cover before turning on
power to this equipment.
n
Use a torque screwdriver to tighten the captive nut panel
screw to 5 in-lb (0.56 N-m) torque to ensure a proper
ground connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
CAUTION
HAZARD OF ELECTRICAL SHOCK AND FIRE
n
Do not open. No serviceable parts inside. Provided with
integral protection against overloads. Bonding between
conduit connections is not automatic and must be provided
as part of the installation.
n
Read manual before installing or using.
n
Do not cover or obstruct ventilation openings.
n
Do not mount in zero-clearance compartment –
overheating may result.
n
Do not expose to rain or spray.
n
Install GFCI protection of branch circuits connected to the
AC output per electrical code requirements.
n
Do not connect AC OUT to any other source of power.
Damage to unit may occur.
n
For AC IN and AC OUT, use wires suitable for at least
75°C.
Failure to follow these instructions can result in minor or
moderate injury.
NOTES :
1. Follow these instructions and those published by the battery
manufacturer and the manufacturer of any equipment you
intend to use in the vicinity of the battery. Review cautionary
markings on these products and on the engine.
2. Freedom EX 4000 Inverter/Charger with 48VDC-to-12VDC
Converter products are designed for deep cycle lead-acid
batteries. See warning below when connecting to lithium ion
batteries.
3. Do not use transformerless battery chargers in conjunction
with the inverter/charger/converter due to overheating.