Woods BATWING BW20.50QE, Руководство оператора

Страница: 4 / 105

4 Introduction
MAN1279 (15/04/2019)
SPECIFICATIONS
GENERAL INFORMATION

Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating and
maintaining your cutter. Read it carefully. It furnishes informa-
tion and instructions that will help you achieve years of
dependable performance. These instructions have been
compiled from extensive field experience and engineering
data. Some information may be general in nature due to
unknown and varying operating conditions. However, through
experience and these instructions, you should be able to
develop procedures suitable to your particular situation.
The illustrations and data used in this manual were current at
the time of printing but, due to possible inline production
changes, your machine may vary slightly in detail. We
reserve the right to redesign and change the machines as
may be necessary without notification.
Throughout this manual, references are made to right and left
directions. These are determined by standing behind the
equipment facing the direction of forward travel. Blade rota-
tion is clockwise (left wing) and counterclockwise (right wing
and centre section) as viewed from the top of the cutter.
BW20.50Q BW20.60Q BW20.70Q
Cutting Height (Varies with tire selection) 50.8 mm - 381 mm (2 in - 15 in)
Cutting Width 6096 mm (240 in)
Overall Width 6324.6 mm (249 in)
Transport Width 3124.2 mm (123 in)
Tractor HP 70 - 200 70 - 300 70 - 300
Blade Spindle 3
Blade Overlap 152.4 mm (6 in)
Number of Blades 6
Blade Rotation Left Spindle: CW; Right Spindle & Center: CCW
Input Driveline Cat 5 Heavy
CV Cat 6
Side Frame Thickness 6.35 mm (1/4 in)
Weight (approximate kg with 8 large aircraft
tires, single chain shielding, and CV drive) 2918.8 kg
(6435 lb)
2882.1 kg
(6354 lb)
3510.8 kg
(7740 lb)
Tongue Weight (approximate kg)
1043.3 kg
(2300 lb)
1088.6 kg
(2400 lb)
Wheel Size 737 mm Max
Torsion Protection Slip Clutch
Blade Speed 1000 RPM 298.1 km/h (16,300 ft/min)
WARNING WARNING
This Operator’s Manual should be regarded as part of the machine.
Suppliers of both new and second-hand machines must make sure
that this manual is provided with the machine.