Winterthur Instruments AG CoatMaster, Руководство пользователя

Страница: 71 / 86

Operation Manual CoatMaster
70/83
„CR/LF“: ends the command (line break (Hex 0D 0A, escape sequence \r\n))
The argument STATUS is contained in every command answer and can have the following values:
•
OK: The command was carried out correctly.
•
ERROR: The command was not carried out correctly and aborted.
•
PENDING: The command is still pending.
•
WARNING: Warning, e.g. when the measuring values are not reliable
•
MESSAGE=<VAL>: Description of the problem in case of an error or warning message
Start a measurement:
MEASURE?CONFIGID={Application-­‐ID}<CR/LF>
{Application ID} stands for the application used for the measurement. The application IDs of all appli-­‐
cations defined within the CoatMaster are stored in the application list under their application name.
Measurement result:
RES_MEASURE?STATUS=OK&MEASURE_ID=3&THICKNESS=12.0&TIMESTAMP=1362061773072<CR/L
F>
The value for the argument TIMESTAMP stands for „milliseconds since January 1, 1970, 00:00:00
GMT".
Thus, in the upper example the value 1362061773072 stands for the time specification 28. February
2013, 14:29:33 GMT (see also http://www.epochconverter.com/).
In case the meausurement could not be carried out, the following error message comes back:
RES_MEASURE?STATUS=ERROR&MESSAGE={error message}<CR/LF>
The text part in the brace {error message} is replaced by a corresponding error message. A list of
error messages is given in the CoatMaster manual in chapter 9.2.
In case a warning message is issued after a measurement:
RES_MEASURE?STATUS=WARNING&MESSAGE={warning message}<CR/LF>
The text part in the brace {warning message} is replaced by a corresponding warning message. A list
of warning messages is given in the CoatMaster manual in chapter 9.2.
Query application list:
GETCONFIGURATIONS<CR/LF>
Query result:
RES_GETCONFIGURATIONS?STATUS=OK&ID=1&NAME=config1&ID=2&NAME=config2 … <CR/LF>