8
1.
Important Information for System Operators
Every time the day-hopper is filed the ‚date and time‘ should be documented by adding the date and volume to the
“Storage room fill“ sticker – Fig. 4.
Pressing any button will turn on the display. The boiler is only turned off when the ON/OFF button is pressed
after the display is turned on. Wait until burnout mode has finished (this will not be indicated on the display) and
open the combustion chamber doors.
During filling, negative pressure is created in the pellet day-hopper, which can cause burn-back in the pellet
boiler/heater. Therefore, the boiler/heater must be prevented from operating during the filling procedure.
1.6 Filling the pellet store
Fig. 2
Turning off BioWIN XL
Fig. 3
Opening inspection cover during
the filling process
Inspection cover, top
Fig. 4
“Storage room fill“ sticker on
the storage room door
002357/00
01/2010
Befüllung Lagerraum
Filling date and volume
Remplissage du silo de stockage
Datum/Date/Date
Menge/Volume/Quantité
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
CAUTION
The pellet boiler must be turned off
correctly
at least 15 minutes before the pellet
store is filled – Fig. 2.
Press the ON/OFF button. Never turn off using the emer-
gency OFF switch!
Note!
To prevent negative pressure arising in the pellet boiler, remove the inspection cover (Fig. 3) and
leave open during the filling process.