background image

41

2. 

Operation

1  Only displayed if there is a feed system installed with modifications on the service level by trained service personnel.

2.8.1.5  Probe switching

1

It is possible to set which probe(s)/zone(s) are used for transporting pellets from the pellet storage room. These 
settings options are dependent on the service level setting in the “Type of pellet feed system“ menu. 

Service level settings in the 
“type of pellet feed system“ 
menu option.

Setting options 
for probe 
switching

Description

No feed

USA, Canada and Europe

Suction turbine with 2 probes

all probes
only probe 1
only probe 2

Removal from both probes, automated switching
Removal from probe 1 only, no switching
Removal from probe 2 only, no switching

USA, Canada and Europe

Suction turbine with 3 probes

all probes
only probe 1
only probe 2
only probe 3

Removal from all 3 probes, automated switching
Removal from probe 1 only, no switching
Removal from probe 2 only, no switching
Removal from probe 3 only, no switching

Europe only!

Suction turbine with 4 probes

all probes
only zone 1
only zone 2
only probe 1
only probe 2
only probe 3
only probe 4

Removal from zone 1 and zone 2, automated switching
Removal from probe 1 and probe 2, automated switching
Removal from probe 3 and probe 4, automated switching
Removal from probe 1 only, no switching
Removal from probe 2 only, no switching
Removal from probe 3 only, no switching
Removal from probe 4 only, no switching

Europe only!

Suction turbine with 6 probes

all probes
only zone 1
only zone 2
only probe 1
only probe 2
only probe 3
only probe 4
only probe 5
only probe 6

Removal from zone 1 and zone 2, automated switching
Removal from probes 1-3, automated switching
Removal from probes 4-6, automated switching
Removal from probe 1 only, no switching
Removal from probe 2 only, no switching
Removal from probe 3 only, no switching
Removal from probe 4 only, no switching
Removal from probe 5 only, no switching
Removal from probe 6 only, no switching

Europe only!

Suction turbine with 8 probes

all probes
only zone 1
only zone 2
only probe 1
only probe 2
only probe 3
only probe 4
only probe 5
only probe 6
only probe 7
only probe 8

Removal from zone 1 and zone 2, automated switching
Removal from probes 1-4, automated switching
Removal from probes 5-8, automated switching
Removal from probe 1 only, no switching
Removal from probe 2 only, no switching
Removal from probe 3 only, no switching
Removal from probe 4 only, no switching
Removal from probe 5 only, no switching
Removal from probe 6 only, no switching
Removal from probe 7 only, no switching
Removal from probe 8 only, no switching

Europe only!

Suction turbine with mixer

INFORMATION

Only trained service personnel may perform system modifications on the service 
level. (Directions for these settings can be found in the BioWIN XL installation in-
structions)

Содержание BioWIN XL













































































Отзывы: