26
2.
Operation
Fig. 32
Pellet consumption
total
back
3.8
tn. sh
2.7.3 Pellet consumption total
The total amount of pellets consumed is displayed in tonnes.
Note:
The “pellet consumption total” is a calculated value and can differ from
the actual v
alue by ±15 %.
2.7.4 Flue gas temperature
This function displays the current flue gas temperature.
Fig. 33
Flue gas temperature
back
298
°F
2.7.5 Boiler temperature setpoint
This display indicates the boiler temperature setpoint as calculated by the con-
trol system. This setpoint is used to control the burner.
Fig. 34
Boiler temperature
setpoint
back
145
°F
2.7.6 Current boiler output
The current boiler output is displayed in %. The boiler output (modulation mode)
can be set from 30 % to 100 %.
Fig. 35
Current
boiler output
back
70
%
2.7.7 Switch/buffer temperature
The switch/buffer temperature is not displayed for an individual BioWIN XL boiler.
The current switch/buffer temperature is only displayed for a BioWIN XL
cascade (system with 2 or 3 BioWINs).
Fig. 36
Switch/buffer
temperature
back
158
°F
2.7.2 Operating hours
The total number of burner operating hours is displayed.
Fig. 37
Operating hours
back
1234
h
INFORMATION
The flue gas temperature is measured directly
on the flue outlet. Therefore, it may deviate from
a standard measurement.
