40
2.
Operation
Fig. 86
Feed start time
Start
10:00 pm
–
save
back
+
“With start time”
A time for filling the hopper can be set in the “Time profile
feed” menu, if the “With start time” setting is active in the
“Feed operating mode” menu (see section 2.8.1.3). The
hopper is filled every day at the specified time. Interim fills
are also performed if the filling amount is not sufficient for
a full 24 hours.
Factory setting “Feed start time:” Start 10:00 pm.
Pressing the
+
or
–
buttons changes the time in 1 minute
increments – Fig. 86.
Fig. 87
Feed start time
Start
10:30 pm
–
save
back
+
Press the
save
button to confirm the changed time – Fig. 87.
The display will show “Parameter is saved” for a few se-
conds (Fig. 88) and then return to the previous screen –
Fig. 89.
Fig. 88
Parameter is saved
(Animated symbol)
Fig. 89
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
choose
back
Exit the menu or sub-menu by pressing the
back
button
(Fig. 89) or by waiting 10 minutes.
Fig. 90
Feed without time control or
switched off
back
“Without time control” or “switched off”
No setting is possible in the “Time profile feed” menu if the
“Without time control” or “switched off” settings are active
in the “Feed operating mode” menu (see section 2.8.1.3) –
Fig. 90.
Exit the menu or sub-menu by pressing the
back
button
(Fig. 90) or by waiting 10 minutes.
