53
3.
Care, Cleaning, and Maintenance
3.6 Induced draft fan (ID fan), fan box
The ID fan is checked and cleaned as part of the recommended regular maintenance by Windhager representati-
ves and partners.
– Disconnect the ID fan plug on the back of the control panel – Fig. 127.
– Unscrew four wing nuts from the fan box and raise the entire fan unit – Fig. 128.
– Remove fly ash with a vacuum cleaner.
– Raise blower box at front and take out – Fig. 129.
– Vacuum top parts of coasting surface or use a cleaning brush to clean them – Fig. 130.
– Before disconnecting the power supply, turn off the BioWIN XL using the ON/OFF button on the InfoWIN
PLUS
(Fig. 125) and wait until the display has gone out.
– Remove the cladding cover – Fig. 126.
Fig. 125 Turning off BioWIN
Fig. 126 Removing cladding cover at rear
Fig. 127 Disconnecting the ID fan plug
Fig. 128 Unscrewing fan unit
Fig. 129 Taking out fan box
Fig. 130 Cleaning the fan box surfaces
