Wilo Helix2.0-VE, Инструкция по установке и эксплуатации

Страница: 33 / 92

en
Installation and operating instructions • Drive for Wilo-Helix2.0-VE / Wilo-Medana CH3-LE • Ed.01/2022-06 33
Item Designation Explanation
6 Operating data and meas-
urement area Shows current operating data and measured values. The operating data
displayed depends on the set control mode and is displayed alternately.
Table 10: Home screen
Main menu
n-c
P electr = 4 W
Setpoint
Double pump
status
I Override
Flow
related
Home screen - Active influence
The following table lists the Active Influences “Override” indicated in the Home Screen:
Symbol
(from highest to lowest priority)
Displayed icon Description
Error Error active, Motor stopped
Pump kick Pump kick active
Override Off OFF Binary input OFF
Pump Operation Off OFF Switched Off via manual Pump On/Off
Setpoint Off OFF Analog Setpoint Off
Fallback Speed Pump runs at Fallback speed
Fallback Off OFF Fallback active, but configured for Motor
stop
No Active Override OK No special inluence
The following table lists Active Influences “Double Pump Status” indicated in the Home
Screen:
Symbol
(from highest to lowest priority)
Displayed icon Description
Off Partner Issue The other pump is in error state and this
pump is not running (due to current setting,
control state or error)
Partner Issue The other pump is in error state and this
pump is running
Duty/Standby Off The double pump is in Duty/Standby opera-
tion and both pumps are not running (due
to current setting or control state)
Duty/Standby This Pump The double pump is in Duty/Standby opera-
tion, this pump is running and the other
pump is not running
Duty/Standby Other Pump The double pump is in Duty/Standby opera-
tion, this pump is not running (due to control
state or error) and the other pump is run-
ning
The following table lists Active Influences “Flow Related” indicated on the Home Screen:
Symbol
(from highest to lowest priority)
Displayed icon Description
Zero Flow Detection STOP Zero flow detected, pump stopped (off)