Wilo Helix2.0-VE, Инструкция по установке и эксплуатации

Страница: 11 / 92

en
Installation and operating instructions • Drive for Wilo-Helix2.0-VE / Wilo-Medana CH3-LE • Ed.01/2022-06 11
N° Component
1 Electronic module lower part
2 Electronic module upper part
3 Fastening screws of the electronic module upper part, 4x
4 Fastening screws of the electronic module lower part, 4x
5 Fastening screw of the motor, main fastening, 4x
6 Motor adapter for electronic module
7 Motor housing
8 Fixation points for transport lugs on motor housing, 2x
9 Motor flange
10 Motor shaft
11 Key shaft
12 Lantern
13 O-ring
Table 1: Arrangement of the main components
Fig. 2: Drive overview
Item Designation Explanation
1 Motor Drive unit. Forms the drive together with the elec-
tronic module
2 Graphic display Provides information about settings and pump
status. Self-explanatory user interface for setting the
pump
3 Electronic module Electronic unit with graphic display
4 Electrical fan Cools down the electronic module
Table 2: Description of the pump
1. The motor with mounted electronic module can be rotated relative to the lantern. Ob-
serve the instructions in the chapter "Permitted installation positions and change of
the arrangement of components before the installation".
2. The display can be rotated in 90° steps as required. (See chapter "Electrical connec-
tion").
3. Electronic module
4. An unobstructed and free air flow must be ensured around the electric fan. (See
chapter on "Installation")