37
6 Set up with the display and adjustment module
WIKA Operating Instructions - Process pressure transmitter IPT-2x
4. Enter the max. height of the interface corresponding to the per-
centage value.
The max. adjustment for interface is finished.
Proceed as follows:
. Select in the menu item "
Setup
" with
[->]
"
Adjustment
" and con-
firm with
[OK]
. Now confirm the menu item "
Distance
" with
[OK]
.
. Edit the sensor distance with
[OK]
and set the cursor to the
requested position with
[->]
.
. Set the distance with
[+]
and save with
[OK]
.
The adjustment of the distance is hence finished.
Proceed as follows:
1. Select the menu item "
Setup
" with
[->]
and confirm with
[OK]
.
Now select with
[->]
the menu item "
Adjustment
", then "
Min.
adjustment
" and confirm with
[OK]
.
2. Edit the percentage value with
[OK]
and set the cursor to the
requested position with
[->]
.
3. Set the requested percentage value (e.g. 0 %) with
[+]
and save
with
[OK]
. The cursor jumps now to the pressure value.
4. Enter the value corresponding to the min. level (e.g. 0 m).
5. Save settings with
[OK]
and move with
[ESC]
and
[->]
to the max.
adjustment.
The min. adjustment is finished.
For an adjustment with filling, simply enter the actual measured value
indicated at the bottom of the display.
Proceed as follows:
1. Select with
[->]
the menu item Max. adjustment and confirm with
[OK]
.
2. Edit the percentage value with
[OK]
and set the cursor to the
requested position with
[->]
.
3. Set the requested percentage value (e.g. 100 %) with
[+]
and
save with
[OK]
. The cursor jumps now to the pressure value.
Distance level density-
compensated
Min. adjustment level
density-compensated
Max. adjustment level
density-compensated
