manualshive.com logo in svg

WIKA IPT-2 Series, Руководство по эксплуатации

Поделиться
Скачать
WIKA IPT-2 Series Скачать руководство пользователя страница 29

29

6 Set up with the display and adjustment module

WIKA Operating Instructions - Process pressure transmitter IPT-2x

6  Set up with the display and adjustment 

module

6.1  Parameter adjustment - Extended adjustment

For technically demanding measuring points, you can carry out 

extended settings in "

Extended adjustment

".

The main menu is divided into five sections with the following func-

tions:

Setup: Settings, e.g., for measurement loop name, application, units, 

position correction, adjustment, signal output
Display: Settings, e.g., for language, measured value display, lighting
Diagnosis: Information, e.g. on instrument status, pointer, measure-

ment reliability, simulation
Additional adjustments: PIN, date/time, reset, copy function
Info: Instrument name, hardware and software version, date of manu-

facture, sensor features
In the main menu item "

Setup

", the individual submenu items should 

be selected one after the other and provided with the correct param-

eter values.
The following submenu points are available:

In the following section, the menu items from the menu "

Setup

" for 

electronic differential pressure measurement are described in detail. 

Depending on the selected application, different sections are relevant.
Information:

Further menu items of the menu "

Setup

" as well as the complete 

menus "

Display

", "

Diagnosis

", "

Additional adjustments

" and "

Info

" 

are described in the operating instructions of the respective master 

sensor.

6.1.1 Setup

In this menu item you activate/deactivate the slave sensor for elec-

tronic differential pressure and select the application.

Main menu

Application

Содержание IPT-2 Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды