31
If you experience
Possible Causes
Solution
Error Code Appears in Display (cont.)
Once any possible issues are corrected, touch the POWER button once to clear the code. Re-select and restart the cycle.
F8E3
Overflow of water
detected/overflow cannot
drain
Inlet valves on washer/dryer are
leaking internally and washer/dryer
cannot drain during overflow.
Call for service.
F9E1
Drain timeout/
drain pump failure
Drain pump filter on washer/dryer
may need to be cleaned. Bellow
drain holes in washer/dryer may
be obstructed. Washer/dryer drain
hose or home drain system may be
obstructed. Drain pump on washer/
dryer may have failed.
Clean drain pump filter on washer/dryer. Check bellow drain
holes in washer/dryer for obstructions. Check washer/dryer
drain hose and home drain system for obstructions. If problem
persists, call for service.
Check for proper drain hose
installation.
Ensure top of drain pipe is installed at least 39
"
above the floor.
Ensure drain hose extends no farther than 4 1/2
"
into standpipe.
FCE1
Wi-Fi error
HMI cannot communicate with Wi-Fi
module.
Call for service.
PF
Appears upon recovery from power
loss, if power was lost while running
a cycle
Touch POWER once to clear the code. Then touch POWER
again and restart the washer/dryer.
First try the solutions suggested here or visit our website at
www.whirlpool.mx/owners
for assistance and to possibly avoid a service call.