Westinghouse WPX2700, Инструкция по эксплуатации

Страница: 13 / 48

9
SPRAY GUN HOLDER
Tools required – 4 mm hex key and 10 mm socket
wrench.
Attach the spray gun holder to the handle using the
supplied fasteners as shown in Figure 6.
1 - Hex Bolt
2 - Nut
3 -
Washer
4 - Spray Gun Holder
5 - Handle
6 -
Push Fit Rivet
Figure 6 – Attaching Spray Gun Holder to Handle
SPRAY LANCE REST
Attach the spray lance rest to the frame using the
supplied fasteners as shown in Figure 7.
1 -
Hex Bolt
2 - Nut
3 - Washer
4 -
Spray Lance Rest
5 - Frame
Figure 7 – Attaching Spray Lance Rest to Frame
SPRAY NOZZLES AND
CLEANING TOOL
Insert the spray nozzles and the nozzle cleaning tool
into their respective marked positions on the hose and
nozzles holder as shown in Figure 8.
1 - Spray Nozzle
2 - Nozzle Cleaning Tool
3 - Hose and Nozzles
Holder
Figure 8 – Storing Spray Nozzles and Cleaning Tool
SPRAY GUN AND LANCE
1. Check that the two O-rings on the spray gun
- lance threaded coupling are intact and not
damaged and then lubricate them by moistening
with water or applying silicone lubricant.
2. Assemble the coupling and tighten the connection
firmly by hand. It is a standard right-handed
thread. See Figure 9.
1 - Spray Gun
2 - Lance
3 - O-Ring
Figure 9 – Assembling Spray Gun and Lance
Front View Rear View
4
5 5
5
3 2 1
4
3
4
1
2 3 1
2
1
1
2
3
6