Welch Allyn Propaq LT 802LT0N, Руководство по обслуживанию

Страница: 27 / 80

Service Manual Troubleshooting and repair 23
Set LCD bias
When the display module has been replaced, you must then set the LCD bias.
1. On the monitor, navigate to the Bias screen.
HR/min Setup Service Display Bias .
Use the controls indicated to set the bias. Bias is optimized when the visible shimmer in
the test pattern is reduced to the minimum level.
Check radio status
The Radio Status screens provide information that might be required if you have to
troubleshoot the Acuity system network.
Note
Perform this test only under fluorescent lighting.
Exit Exit
NIBP NIBP
ID: SET_D80GH2FK ID: SET_D80GH2FK 20:43:54 20:43:54
Adult Adult Rm Rm
Service Service ECG ECG SpO2 SpO2 USB USB Radio Radio Software Software
Display Display Battery Battery Voltages Voltages Buttons Buttons
Display Display Pixel Test Pixel Test Bias Bias
Display Bias Display Bias 32 32
Fonts Fonts
Use left ( ) or right ( ) to increase/decrease bias. Use left ( ) or right ( ) to increase/decrease bias.