Welbilt Convotherm OES mini easyTouch, Руководство по установке

Страница: 25 / 106

3.7 Hazards and safety precautions during installation
Safety hazard: electrical power
When installing the appliance, be aware of the following hazards and take the specified preventive ac‐
tions:
Danger Where or in what situations
does the hazard arise?
Preventive action Safety device
Risk of electric shock
from live parts
■
Under covers
■
Under the operating panel
■
On the power supply cable
■
Work on the electrical
system must only be per‐
formed by qualified elec‐
tricians from an author‐
ized service company
■
Professional working
Covers
Before removing the cov‐
ers:
■
Switch off all connections
to the power supply
■
Take protective meas‐
ures at every power
switch to ensure that the
power cannot be switch‐
ed on again
■
If the appliance has previ‐
ously been connected to
the electricity supply, wait
15 minutes to allow the
DC bus capacitors to dis‐
charge
■
Make sure that the appli‐
ance is de-energized
Covers
■
Ensure that all electrical
connections are in perfect
condition and fixed se‐
curely before putting the
appliance into service
Covers
Risk of electric shock
from live parts
■
On the appliance and on
adjacent metal parts
■
On the appliance and on
adjacent metallic accesso‐
ries
■
Before preparing the ap‐
pliance for first-time use,
make sure that the appli‐
ance, including all metal‐
lic accessories, is con‐
nected to a equipotential
bonding system.
Equipotential
bonding sys‐
tem
Risk of electric shock
from incorrect water
connection
■
In the entire work area, as
soon as the water pipe
bursts or starts leaking
■
Use a fixed connection
■
Make sure that the water
pressure of the water
supply is compatible with
the pressure specified on
the appliance
■
Use suitable pipes and
hoses in accordance with
applicable regulations
(EN 61770 in countries
where European stand‐
ards apply)
none
3 For your safety
Installation manual 25