WEISS WSG 32, Инструкция по монтажу и эксплуатации

Страница: 19 / 53

- 17 -
Definition of the nominal gripping force
To determine the nominal gripping force, the module is non-positively mounted to an aluminum plate, see
Figure 8. The plate itself is thermally insulated from the underlying surface. With an ambient temperature
of 22° C the module can hold with the nominal gripping force for at least 5 hours.

For high gripping forces or long holding cycles, make sure that heat is well dissipated via the screw
contact surface. Damage to the module is possible!
7.3 Nominal electrical data

Exceeding the specified nominal data can damage the module. If in doubt, please discuss your ap-
plication with our technical sales department.
Parameter Unit Min. Typical Max. Remark
Clamping voltage V DC 22 24 28
Currend drawn when idle A 0.05
Current drawn when hold-
ing A 0.75 Gripping force = 50N
Positioning resolution µm 1.3
Controller Integrated
Field bus interface Ethernet / CAN-Bus (optional) / PROFINET
(optional)
Configuration interface web based
Figure 8: Arrangement for ascertaining the nominal gripping force