©
2019 WEINZIERL ENGINEERING GmbH
Page 15/16
When the lock is ended, the last received value (not priority
object) is represented as PWM at the output.
Group object
Type KNX
Size
Direction
GO 75 Actuator B: Lock - Activate
1.001
1 Bit
From KNX
GO 77 Actuator B: Prior. valve actuator
(PWM) - Control value
5.001
1 Byte
From KNX
Q. Actuator B: Lock function
Polarity of object
This parameter defines, if the lock should be activated by receiv-
ing a 1 or by receiving a 0.
The following options are selectable:
Lock active on 1
Lock active on 0
Behavior on start
This parameter defines, which behavior the output should repre-
sent, if the lock activates.
The following options are selectable:
No reaction
The PWM value remains as to begin of the lock func-
tion.
Value
When the lock is activated, a defined PWM value is
represented on the output.
Control value (PWM)
If a defined PWM value should be set to the output when the
lock is activated, this value can be set with this parameter.
R.
Logic / Timer
Function 1 - 16
These channels contain additional functions such as timing and
logic. All these 16 additional functions are identical.
The following options are selectable:
Disabled
Timer
Logic
Function type (Disabled)
If the function type is set to "Disabled", no timer or logic specific
parameters and group objects are available.
Function type (Timer)
The timer-specific parameters and group objects are available.
Function type (Logic)
The logic-specific parameters and group objects are available.
These additional logic and timer functions can be
linked to one another by means of the associated
group objects. This also allows to create complex
structures. For this purpose, the output of a function is
set to the same group address as the input of the next
function.
S.
Function 1 - 16 (Timer)
Function name (10 Characters)
The function name can be chosen freely.
The name is visible in the group object entry in the ETS soft-
ware. This makes it easier to work with the associated group
objects, because the given name is displayed there as a label.
Timer type (Switch-on delay)
A timer that switches ON after duration defined in
‘Delay time [s]’ parameter.
The output value can be inverted by parameter
‘Output’ (Not inverted / inverted).
Input
-------1------------------0----------
Output
-------|-T-1--------------0----------
Group object
Type KNX
Size
Direction
Timer - Switch-on delayed - Input
1.002
1 Bit
From KNX
Timer - Switch-on delayed - Output
1.002
1 Bit
To KNX
Timer type (Switch-off delay)
A timer that switches OFF after duration defined in
‘Delay time [s]’ parameter.
The output value can be inverted by parameter
‘Output’. (Not inverted / inverted)
Input
-------1------------------0----------
Output
-------1------------------|-T-0------
Group object
Type KNX
Size
Direction
Timer - Switch-off delayed - Input
1.002
1 Bit
From KNX
Timer - Switch-off delayed - Output
1.002
1 Bit
To KNX
Timer type (Switch-on and -off delay)
A timer that switches ON and OFF after duration defined in
‘Delay time [s]’ parameter.
