©
2019 WEINZIERL ENGINEERING GmbH
Page 10/16
J.
Dimmer A: Sequencer
The sequencer can be used to create complex sequence pro-
grams consisting of up to 32 individual steps for the dimmer
channel. The individual steps can be activated under the follow-
ing starting conditions:
At a fixed time of day
After a waiting time from a previous step has elapsed
By on/off telegram
When receiving a parameterized scene number
When a step is activated, a value can be dimmed to or a scene
number can be sent, and a step or a whole sequence of steps
can be repeated cyclically.
The following objects are available for the general control of the
sequencer:
Group object
Type KNX
Size
Direction
GO 33 Dimmer A: Sequence suspend -
Suspend/Resume
1.001
1 Bit
From KNX
GO 34 Dimmer A: Sequence on/off -
Switch
1.001
1 Bit
From KNX
The following parameters determine the general behavior of the
sequencer:
Steps of sequencer
Number of steps (0...32) to be used
Resume sequence after man. operation
An activated sequence can always be interrupted or continued
via object 33 an ON telegram interrupts the sequence, and with
an OFF telegram it is continued.
A sequence is also interrupted after manual operation, i.e. after
commands for dimmer, automatic mode, slumber or scene func-
tion.
In addition, this parameter determines how an interrupted se-
quence can still be continued:
Only by object
The sequence can only be continued by object 33.
After off-time
The sequence is continued after the set off-time.
On next activated step
The sequence is continued with the next activated
step, the next step can be activated by object or time-
controlled.
Off-time
Only visible if the sequence is to be continued after off-time, with
this parameter the off-time can be configured.
Step after man. operation
This step is executed when resuming after manual operation, the
function of the set step is always executed, regardless of its
otherwise set starting conditions.
P
olarity of object “Sequence on/off“
This parameter can be used to set the telegram value with which
the sequence can be switched on and off via object 34. If the
sequence is switched off, any further activation of a step is disa-
bled.
Behavior on switching on
Here it is determined how the sequencer behaves when
switched on by object 34:
No reaction
No function is executed, the sequencer waits for steps
to be activated.
Step x
The function of the step is executed (independent of
the other set start conditions of the step), the se-
quence is then continued according to its configuration
from this step onwards.
Switching on also reactivates a sequence interrupted by manual
operation.
Behavior on switching off
Here it is determined how the sequencer behaves when
switched off by object 34:
Complete actual step
If the sequencer is in a dimming process, it is complet-
ed.
Step x
The function of the step is executed (independent of
the other set start conditions of the step).
Stop immediately
If the sequencer is in a dimming process, it is stopped.
Apart from the set behavior when switching off, any further acti-
vation of a step after switching off is disabled until the sequencer
is switched on again by object 34.
Step 1-32:
