WEIHONG NK105 G2F, Руководство производителя

Страница: 32 / 89

Specialized Concentrated Focused
「
20
」
System Page
One, two or several workpiece offsets can be used in one machining program. As shown in Fig. 3-4,
three workpieces are installed on the worktable, so each workpiece has a workpiece origin
corresponding to the G code of workpiece coordinate system. To drill a hole on each of the workpiece,
with calculation depth as Z-0.14, the programming example is as follows.
G 5 4 ( X )
G
5
4
(Y
)
M a c h in e
O r ig in
W o r k p ie c e
W o r k p ie c e
W o r k p ie c e
G 5 5 ( X )
G 5 6 ( X )
G
5
6
(Y
)
G
5
5
(Y
)
Fig. 3-4 Example figure
O1801
N1 G20
N2 G17 G40 G80
N3 G90 G54 G00 X5.5 Y3.1 S1000 M03 (Use G54)
N4 G43 Z0.1 H01 M08
N5 G99 G82 R0.1 Z-0.14 P100 F8.0
N6 G55 X5.5 Y3.1 (Switch to G55)
N7 G56 X5.5 Y3.1 (Switch to G56)
N8 G80 Z1.0 M09
N9 G91 G54 G28 Z0 M05 (Switch to G54)
N10 M01
…
Program segments N3~N5 are for the first workpiece, within G54 WCS; program segment N6 drills the
hole for the second workpiece of the same batch within G55 WCS; program segment N7 drills the third