Specialized Concentrated Focused
「
50
」
Machining Operation of NK105G3F
Where:
Press
-
or
-
.
-
to increase or decrease the feedrate override.
5.3.2.
Spindle Speed Adjustment
Spindle speed are adjusted by pressing combination key
+
-
or
+
-
.
-
, and
divided into 11 gears from 0.5s to 1.5s with speed increasing sequentially.
5.3.3.
Machining Pause and Jiggle
Refer to chapter 4.10.3 for details.
Where:
Press
+
to enter the jiggle page.
5.3.4.
Soft/Hard Limit Handling
Refer to chapter 4.10.5 and chapter 4.10.6 for details.
5.3.5.
E-stop Handling
When E-stop occurs, the system will stop machining, and give an alarm as shown in Fig. 5-2, the
―ALM‖
indicator on the panel ON. Before executing any other operations, remove this alarm by turning the
E-stop button clockwise.
After E-stop alarm is removed, home all the axes, and then press
+
to execute breakpoint
resume, i.e. to resume machining from the stop position when E-stop occurs.
1 X 1 5 .6 1 7 E stp
1 Y 5 5 1 .1 0 7 S O ff
1 Z 9 .9 0 0 S lo w
J o g
E S T O P 2
Fig. 5-2 E-stop alarm
CAUTION
In E-stop state, all the other keys are invalid except the “Menu” key. You can press the “Menu” key to enter the
menu page and make desired changes.
Содержание NK105 G2F
Страница 12: ...Specialized Concentrated Focused X Contents...
