Specialized Concentrated Focused
System Page
「
23
」
1. Back REF Point
2. Rect Machining
3. Select Line No
4. Machining Info
O
p
e
ra
tio
n
s
5. Park MCS Site
6. Select WCS
All Home
Z Home
X Home
Y Home
A Home
1. Params Setting
2. Load the Last
1. Park Mode
2. Park Site
7. Array Process
G54~G59 WCS
Fig. 3-7 Submenus under [Operations]
Press the
―Menu‖ key
->
3. Operations, and the press [OK] to enter its page, in which select the desired
menu item by the
―Up‖ and ―Down‖ key. Following is the [Operation] page.
2 . R ect M a ch in in g
3 . S elect L in e N o
4 . M a ch in in g In fo
1 . B a ck R E F P o in t
Fig. 3-8 [Operations] page
Back REF Point
Return to the machine origin. For details, see chapter 4.6.
Rect Machining
The system offers rectangle milling wizard; after setting parameters successfully, press the
―Up‖ and
―Down‖ keys to select [Load Now], and then press [OK] to load the machining file; and then you can
press
to start machining.
You can also select
―2. Load the Last‖, and then press [OK] to load the last rectangle milling and return to
the machining page, and then press
to start machining.
Parameters
―X Init‖ and ―Y Init‖ decide the initial position of machining plane; ―Height‖ and ―Width‖
decides the size of machining plane; two kinds of machining mode are available:
―Horiz. Mill‖ (the feed
direction of tool is parallel to X axis) and
―Long. Mill‖ (the feed direction of tool is parallel to Y axis);
―EachDpth‖ is the tool machining depth each time; generally, the value of ―EngrDpth‖ (the total depth of
several millings) is set bigger than that of
―EachDpth‖; if the value of ―EachDpth‖ is equal to or bigger
than that of
―EngrDpth‖, only one milling will finish the machining; ―NoseGap‖ means the distance
between two adjacent lines, whose value should be set smaller than that of
―ToolDia‖ to avoid missing
millings.
Содержание NK105 G2F
Страница 12: ...Specialized Concentrated Focused X Contents...
