WEIHONG NK105 G2F, Руководство производителя

Страница: 66 / 89

Specialized Concentrated Focused
「
54
」
References
Parameter Meaning Setting range
normally
, ―Back REF First‖ can be set to ―No‖.
G73_G83Retract: the retract amount after each feed under G73 command; under G83 command, the
distance between the feed plane where the cutter changes from G00 to Gxx and the previous peck
depth.
Step length: custom #variable, convenient for operators to change step length in the program file.
There are 8 groups of step length in total from the first group #STEP0 to the eighth group #STEP7
respectively. For instance, G01X=#STEP2 refers to the X axis moving the third group step length
under G01 command.

Parameters Related with Offset
Parameter Meaning Setting range
Public Offset
Aiming at all the WCSs, used for adjusting workpiece
origin of X, Y, Z and A axes
-10000~10000 mm
Work Offset D-value of WCS origin and MCS origin. -10000~10000 mm
The relation of workpiece offset, tool offset and public offset is as following:
Workpiece coordinate = Machine coordinate - Workpiece offset
– Tool offset – Public offset

Spindle Parameters
Parameter Meaning Setting range
Spindle Stop
SOff at pause Whether to stop spindle at pause Yes: Stop; No: Not stop
SOff at Stop Whether to stop spindle at stop Yes: Stop; No: Not stop
SOff at End Whether to stop spindle when machining completed Yes: Stop; No: Not stop
ProcessEndTip
Whether to turn on the red light indicator as a sign of
the completion of machining
Yes: On; No: Off
This group of parameters sets whether to stop spindle under various forms of stop state.

File Parameters
Parameter Meaning Setting range
Dxf Params
Lifting Height
It sets the tool lifting height of Z axis during rapid
traverse when a DXF file is being processed.
0~99999 mm
Process Depth It specifies the machining depth for 2D files. -99999~0 mm
1st Point as 0
It sets whether to set the first point as workpiece origin
when a DXF file is processed.
Yes: Valid; No: Invalid
Shape Process
The system will not process the next shape until the
current shape is finished.
Yes: Valid; No: Invalid
Bottom
Process
Valve operation is enabled only when [3D cutting] is on
the workpiece surface.
Yes: Valid; No: Invalid
Metric Size It forcibly sets a dxf file using metric size.
Yes: Metric size
No: Imperial size
Eng Params