WEIHONG NK105 G2F Скачать руководство пользователя страница 63

Страница: 63 / 89

Specialized Concentrated Focused

System Update

「

」

6. System Update

NK105G2F/G3F can be used directly since the software has already been well installed before delivered.

In case of breakdown, update the system.

6.1. Software Update

Software update is included in the process of system image update. If there is no need updating the

system image, directly update the software following the below steps:

1) Store the software application to be updated under the root directory of an USB flash drive, and then

insert the USB flash drive into the USB interface of NK105 control box. (The software application is

composed of five file folders

—

‖CHN‖, ―Config‖, ―ENG‖, ―Font‖, and ―NewNK200‖, which should all be

under the root directory of the USB flash drive.)

2) Power on NK105, press

―Shift‖ to enter the menu page, select ―7. System Upkeep‖ and ―3. System

Update

‖ in turn, and operate according to the tips on the LCD until ―USB Available Now!‖ appears.

Press

―OK‖ to enter the system update interface, and then select ―Delete parameter‖. After

parameter files are deleted, select

―Update system‖ to start updating the software. After update

completed, the new software will be rebooted automatically.

CAUTION

Parameters should be restored to factory setting after each software update, unless the update software is totally

the same as the old software (e.g. the same version). If “Delete parameter” is not selected in the process of update,

it is a must to restore ex-factory parameters after software updated by following the below steps: after the system

is rebooted, press “Shift” to enter the menu page; and then select “6. Param Upkeep” and “3. Factory Params”

sequentially, and then operate according to the tips on the LCD.

6.2. System Mirror Update

1) Store the system image (NK105.nb0) and the software application to be updated under the root

directory of an USB flash drive (above 1G), and then insert the USB flash drive into the USB

interface of the NK105 control box. (The software application is composed of five file folders

—

‖CHN‖,

―Config‖, ―ENG‖, ―Font‖, and ―NewNK200‖, which should all be under the root directory of the USB
flash drive)

2) Power on NK105, and then long press the

―Menu‖ key

until entering the update selection

interface. Press

―1‖ to select ―1: Update menu‖, and then press 3 to select ―3: OS‖ in the new pop-up

Содержание NK105 G2F


























































































Результаты поиска

Содержание NK105 G2F

Отзывы:

WEIHONG NK105 G2F, Руководство производителя, Страница: 63 / 89

Результаты поиска

Содержание NK105 G2F

Отзывы: