Safety Notes
Use as Prescribed
Industrial applications
Weidmuller Australia Pty Ltd products are designed to be used in industrial
environments, by experienced industrial engineering personnel with adequate
knowledge of safety design considerations.
These products should not be used in non-industrial applications, or life-support
systems, without consulting Weidmuller Australia Pty Ltd first.
Range of application
WL-TX/RX-900 modules are available as transmitters (WL-TX-900) and receivers
(WL-RX-900). The receiver monitors its analogue, thermocouple and digital inputs and
transmits the information to one or more receiver units. The receiver units reproduce
the signals at their outputs according to the configuration.
Transmitters and receivers include a default function to work as a pair with the most
commonly used inputs of the transmitter mapped to the outputs of the receiver. You
can setup more complex applications using the configuration software via the RS232
RJ-45 serial port on the front of the unit.
Caution
Do not use WL-TX/RX-900 modules near electrical blasting caps or in potentially
explosive areas!
DANGER
Antennas used with this device must be installed to provide a separation
distance of at least 20 cm from all persons to satisfy RF exposure compliance.
DANGER
Do not operate the transmitter when someone is within 20 cm of the antenna
Ensure that all RF connectors are secure and any open connectors are properly
terminated before applying power to the unit.
8
