Troubleshooting
5.2.2 WL-TX-900 Input Status
To check the status of inputs on a WL-TX-900:
1. Navigate to the Unit page for the unit you want to check.
2. Click the <Read Inputs> buttons.
3. WL Series Configuration Software shows a page indicating the status of all inputs
to the module.
4. Click Update to read the status of the inputs from the module.
5. For analog values (i.e., 4-20 mA analog, Thermocouple, Temperature and Battery
Voltage), you can select the units for displaying the data:
Raw – shows the value as a decimal number;
Hex – shows the value as a hexadecimal number, both in the internal
representation of the module;
mA – displays the number of milliamps that would be output if the data was sent
to an Analog output on a WL-RX-900 module; and
% – displays the percentage of the nominal full scale range.
50
