Weco Edge 550, Руководство пользователя

Страница: 191 / 221

Maintenance... Messages
Edge 580 - Edge 550
5-190
0xB Incompatible edger
configuration
HI lens not allowed. The job you have loaded calls
for High Index (HI) lens
material.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select High Index (HI) lens
material.
Load the job again.
0xC Incompatible edger
configuration
Glass lens not allowed. The job you have loaded calls
for Mineral lens material.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select Mineral lens material.
Load the job again.
0xD Incompatible edger
configuration
Plastic lens not allowed. The job you have loaded calls
for CR39 lens material.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select CR39 lens material.
Load the job again.
0xE Incompatible edger
configuration
Polycarbonate lens not
allowed. The job you have loaded calls
for Polycarbonate lens material.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select Polycarbonate lens
material.
Load the job again.
0xF Incompatible edger
configuration
Bevel not allowed. The job you have loaded calls
for Bevel finishing.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select Bevel finishing.
Load the job again.
0x10 Incompatible edger
configuration
Rimless not allowed. The job you have loaded calls
for Rimless finishing.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select Rimless finishing.
Load the job again.
0x11 Incompatible edger
configuration
Grooving not allowed. The job you have loaded calls
for Grooving finishing.
In the personalisation menus,
you have excluded this
parameter, so the edger cannot
accept this job. Confirm the message.
If you wish to load this job
nonetheless, modifiy the
personalisation of the pull-down
menus.
Select Grooving finishing.
Load the job again.
# Message Conditions for display Action