Weco Edge 550, Руководство пользователя

Страница: 148 / 221

Maintenance... Regular maintenance of the edger
Edge 580 - Edge 550
5-147
5.4.7 E
MPTYING THE WATER TANK
5.4.7.1 P
RELIMINARY REMARKS
>
Use a standard discharge pipe with a 20x27 connection
5.4.7.2 P
ROCEDURE
To empty the settling tank, follow the procedure below :
Flow chart 5-9 : Emptying the settling tank
5.4.7.3 H
INTS
>
If the pump is not activated when you restart the machine after cleaning, open the discharge valve to the
minimum to allow the escape of any air which has remained in the pipes. Close the valve before restarting
the process.
> Always check the water-tightness of the unit before restarting the machine.
• check the connections of the discharge, water supply and pump pipes ;
• ensure that the discharge valve is closed ;
• check the tightness of all fixings, especially as regards the solenoid valves.
#1 Fit a discharge pipe on the same side as the valve and connect it to the
drainage system (bucket, sink, drain ...)
#2
#3
#4
#5
#6 Open the discharge valve
#7 Close the discharge valve when the settling tank is empty.
#8
#9 x 3
#10 Disconnect the discharge pipe and put it away.