Weco Edge 550, Руководство пользователя

Страница: 112 / 221

Edge 580 - Edge 550
4-111
=> Configuration
4.3 PERSONALISATION OF PULL-DOWN MENUS
4.3.1 P
RESENTATION
4.3.1.1 P
RINCIPLE
>
You wish to produce a series of a particular type of job and/or you nearly always work on the same type of job.
> You want the application screen to display your work.
From this menu, it is possible to designate :
• the elements to be displayed at the base of the menu to obtain immediate acces to them ;
•
the elements which must not be displayed because you do not need to use them.
Accordingly, when the machine is started or when the job called up does not contain all the edging data, the
application screen is displayed as you have personalised it.
4.3.1.2 S
CREEN DESCRIPTION
The pull-down menus personalisation screen is shown below :
Ecran 4-4 : Personalisation of pull-down menus (1)
FINISHING
type
BEVEL
type
GROOVE
type
DRILLING
type
LENS
MATERIAL
Type of
OVERSIZING/
RETOUCH
Type of
LENS
Type of
SAFETY-BEVEL
To quit =>
You are in the
Personalisation
of pull-down
menus
DRILLING
type