Chapter 7
Adjustment and initial operation
32708885 Geset 100
Version: 16.07.13
Page 40 of 77
GB
Adjust base conveyor
The base conveyor transports the product to be labeled from infeed passage to labeler
and from labeler to outfeed passage. .
Information on adjustment of base conveyor’s height
The height of the base conveyor has to be adapted to the customer-specific conveyor sys-
tem or to the ergonomic requirements of the operator personnel accordingly.
The base conveyor (Fig. 7-4: Pos. 1) is installed fix. The height of the base conveyor can
be adjusted by the threads at the rubber feet (Fig. 7-4: Pos. 4) of the switch cabinet.
Fig. 7-4: Base conveyor and switch cabinet
No.
Description
1
BASE CONVEYOR
2
DRIVE MOTOR
3
SWITCH CABINET
4
RUBBER FEET
Requirements
¥
Power supply is turned off.
¥
No transportation of products.
Required equipment
¥
Screw wrench (for rubber feet adjustment)
¥
Air level
Instruction
Please adjust the height of the base conveyor as follows.
Step
Procedure
1
Loosen the counternuts of the rubber feet.
2
Adjust the height of the base conveyor to the required criteria (s. section
above).
3
Tighten again the counternuts.
Содержание Geset 100
Страница 2: ...Blank page ...