ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND
GUIDELINES
· THE ANGEL IS LIVE AND CAPABLE OF DISCHARGING.
•
Ensure that the Angel is on (see page 3).
•
As default the Angel Eyes will always be ON
whenever the Angel is switched ON.
•
The Angel eyes can be switched off by pulling and
holding the trigger
for 1 second. The Angel’s
MROF will drop to its default MROF eyes off setting.
It will fire 1 shot to confirm that the eyes have been
switched off and the buzzer will sound once.
The eyes off symbol will be displayed on the
display screen.
•
To turn the Angel eyes back on pull and hold the
trigger
again for 2 seconds,. The MROF will
return to MROF eyes on setting (see page 15 for
factory default setting), the buzzer will sound twice
the eyes on symbol will be displayed on the display
screen.
•
Should the eyes detect a malfunction due to a
component failure or the eyes becoming dirty they
will automatically turn themselves off and the MROF
will revert to its MROF eyes off setting (see page 15
for factory default setting), the display will indicate
that the eyes are off and that a ball is not detected.
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
· Ensure a barrel blocking device is fitted to
the ANGEL.
· Ensure the hopper is removed from the
ANGEL.
· Ensure that there are no paintballs in the
ANGEL.
· Paintball industry standard eye/face/ear and
head protection designed specifically to stop
paintballs and meeting ASTM standard F1776
(USA) or CE standard (Europe) must be worn
by user and any person within range.
· SHOULD YOU BE UNSURE AT ANY STAGE YOU
MUST SEEK EXPERT ADVICE.
•
Ensure that the Angel is off.
•
If required switch the Angel off by pressing and
holding the navigation switch in for 1 second.
A goodbye message will be displayed on the screen
and the Angel will power down.
•
Remove the right hand grip cheek
by removing
the 3 screws
using a suitable 2mm Allen key.
•
If a battery is already present carefully lift the
battery
from its housing.
•
Observe the battery polarity as marked on the
battery housing terminal and on the battery.
Always use a good quality fresh battery.
Replacing the 9v battery
Switching Angel eyes OFF/ON
Push & hold
for 2 secs.
The Angel incorporates the OPTO board. This board
is the latest development in trigger sensing function.
It achieves unsurpassed advancements in trigger
repeatability and sensitivity, its friction free non
mechanical operating switch results in faster shorter
and lighter trigger strokes that give the user higher
prolonged achievable rates of fire.
OPTO board
•
The Macro line hose may be removed from the
Macro line connectors to facilitate maintenance.
•
Pull back the collet
on the connector and keep
the collet depressed.
•
Pull the Macro line hose
out of the connector
firmly.
•
Cut back the Macro line hose cleanly and square
.
•
Push the hose firmly into the Macro line connector
to re-attach.
Important Note:
Please make sure that the macro-line is
trimmed back before re-insertion after it
has been removed.
Macro line hose
