background image

Terms of warranty - USA / Canada

an implied Warranty lasts, so the above limitation 
in (a) may not apply.

(c)  Some states do not allow the exclusion or 

limitation of incidental or consequential damages, 
so such limitations may not apply. 

(d)  And this Warranty gives buyer specific legal rights, 

and buyer may also have other rights provided 
for by law.

5. Parts, Service and Training performed by WDP  
All Warranty and non-Warranty parts, labour and 
service, if any, provided by WDP  related to the 
product are subject to all limitations and disclaimers 
of warranties and remedies provided in this Warranty. 
The replacement or repair of a product by WDP  
does not give rise to any new Warranty except the 
Warranty period provided for herein shall be extended 
by the length of any period in which defective or 
non-conforming product is in possession of WDP  
WDP  may have access to the Product after purchase 
of the Product. WDP  is not under any duty to inspect 
the product for any defects or any improper use or 
modification of the Product, nor to correct or advise 
anyone of any such condition, use or modification, 
which is observed. Any notification, which may be 
given, is voluntary and subject to all limitations and 
disclaimers in this Warranty.
6. User’s Responsibility for Safety and Indemnification
It is Buyer’s or other user’s responsibility to obtain 
all training and means that may be necessary to 
effectively protect all individuals and property from 
damage and bodily injury, which otherwise may 
result from the use or maintenance of the Product, 
and to use the Product in accordance with operating 
instructions and due care. 

If operating instructions are not provided with the 
Product or have been lost, a copy will be provided 
by WDP  without cost on request. Buyer shall use 
and shall require all others to use all safety devices 
and guards furnished with or intended to be used 
with the Product, and to follow proper safe operating 
procedures in accordance with general industry 
standards and as set forth in manuals and instruction 
information furnished by WDP  If Buyer fails to comply 
with the obligations set forth in this section, the buyer 
shall defend and indemnify WDP  harmless from any 
claim, liability or obligation incurred by WDP  or its 
suppliers, distributors, or dealers to persons injured 
directly or indirectly in connection with the use of the 
product contrary to this Warranty or any warning or 
instruction from WDP 
7. Law and Jurisdiction. 

This Warranty shall be governed by the laws of 
Michigan, and Buyer irrevocably submits to the 
non-exclusive jurisdiction of courts sitting in Michigan 
to resolve all disputes arising from or related to this 
warranty or use of the Product.
8. Claims and information procedure.
To make a warranty claim, Buyer must first contact 
the nearest authorised ANGEL Service Centre for 
instructions. A list of authorised ANGEL Service 
Centres may be obtained through WDP website: 
www.wdp.tv, or by contacting WDP by mail at:  
WDP, Metro Triangle, 221 Mount Street, Nechells, 
Birmingham, England, B7 5QT,  
or by fax at +44 (0)121 327 3967.  
or by c44 (0)121 328 2228.

Содержание ANGEL





































Отзывы: