17
Pressure & Leakage Testing
After Use
t"QQMJDBCMFCVJMEJOHBOEDPOTUSVDUJPO
codes and regulations, as well as proper
construction practices, require that ALL
WELDS performed with the TRITON
MUST be pressure- and leakage-tested
to confirm the mechanical integrity of the
system BEFORE they are enclosed or
covered and before completion of a job.
t-FBLJOHGMPPEJOHPSCSFBLTJOQJQFTBOE
joints due to untested welds, improperly
performed welds, incomplete welds,
wrongly sized or constructed welds, or
failure to follow these instructions, can
result in substantial property damage.
t5VSO$POUSPM6OJUQPXFSTXJUDIUP0GG
position. Unplug Control Unit from power
source. Disconnect Fuser from Fuser
Cord and store properly. Disconnect Fuser
Cord and coil carefully. Do not double coil
the Fuser Cord.
t8SBQ$POUSPM6OJU1PXFS$PSEBSPVOE
bracket on Control Unit. Return all unused
TRITON Fittings to their original packaging
and store properly for next use.
IMPORTANT:
TRITON fittings can be pressure tested as soon as the welding job is com-
pleted. This can be accomplished using either air or water. Please consult and follow all appli-
cable building and construction codes and regulations. Please consult and follow required
testing standards and procedures as well as proper construction practices. If air testing is per-
mitted by the required procedures and practices, we recommend air test pressure not exceed
100psi for a minimum of 15 minutes.
t$POTVMUXJUIBMJDFOTFEBOERVBMJGJFE
engineer; follow all local, state and federal
requirements for testing; and carefully
conduct testing in accordance with recog-
nized industry standards.
t,FFQBMMQFSTPOTBUBTBGFEJTUBODFEVSJOH
testing.
t%FBUITFSJPVTQFSTPOBMJOKVSZPSQSPQFSUZ
damage can result from failure of a pipe,
a pipe joint, or a pipe connection during
pressure & leakage testing.
t8IFOQSFTTVSJ[FEGBVMUZQJQFTKPJOUT
or connections may separate suddenly
causing violent, explosive, and dangerous
movement of piping or parts.
t3FTUSBJOQJQJOHBHBJOTUQPTTJCMFNPWF
-
ment from catastrophic failure at a joint or
connection.
t$PSSFDUMZNBEFKPJOUTEPOPUMFBL
Leakage at a joint or connection may
immediately precede catastrophic failure.
t/FWFSBQQSPBDIPSBUUFNQUUPSFQBJSPS
stop leaks while the test section is pres-
surized.
t"MXBZTEFQSFTTVSJ[FUIFUFTUTFDUJPO
before making repairs.
WARNING
!
Equipment Setup & Usage Instructions
NOTICE