9
General Setup, Use, and Care Precautions
TO AVOID SERIOUS PERSONAL INJURY:
t3FBE.BOVBMBOEBMMQSPEVDUMBCFMT
BEFORE using the equipment. Do not
use unless you know the safe and proper
operation of this equipment.
t$IFDLFRVJQNFOUBUMFBTUPODFQFSEBZ
and BEFORE every use for damage and
signs of wear. Replace any worn, dam-
aged, or broken part BEFORE using.
t%POPUVTFJGUIFQPXFS 0O0GGTXJUDI
is not working properly or if the unit will
not power on. Equipment that cannot be
controlled by the power (On/Off) switch is
dangerous and must be repaired before
using.
t%POPUTVCTUJUVUFDPSETGSPNPUIFS
manufacturers. Only use TRITON Power
Cords and Fuser Cords with the system.
Substituting alternative equipment may
cause personal injury or damage to the
equipment, or void the product warranty.
t"WPJEBDDJEFOUBMTUBSUVQT.BLFTVSF
that power (On/Off) switch is in the “Off”
position before plugging (connecting) the
equipment into an electrical outlet (recep-
tacle).
t4UBZBMFSUQBZBUUFOUJPOUPXIBUZPVBSF
doing, and use common sense while
using or working near this equipment.
t%POPUVTFUIJTFRVJQNFOUXIJMFUJSFEPS
under the influence of drugs, alcohol, or
medications. Inattention, fatigue, and drug
and/or alcohol influence may result in seri-
ous personal injury.
t"MXBZTXFBSQFSTPOBMTBGFUZQSPUFDUJPO
when using the equipment. Dress properly
for the job. Use eye and hand protection
as appropriate to help minimize risk of
serious personal injury.
t,FFQQSPQFSGPPUJOHBOECBMBODFBUBMM
times, and do not overreach while using
the equipment.
t1MBDFUIF$POUSPM6OJUGJSNMZPOUIF
ground or a stable work surface. Do not
use the Control Unit on a ladder or shelf.
t%POPUGPSDFUIF'VTFSPOUPUIF'JUUJOH
t%POPUVTFUIF'VTFSGPSBOZQVSQPTF
other than making a weld as instructed
in this Manual. Using the Fuser as pliers,
a wrench, or a hammering device may
result in serious personal injury and can
damage the equipment.
t6TFUIFDBSSZJOHIBOEMFUPUSBOTQPSU
move, or position the Control Unit for use.
t6OQMVH EJTDPOOFDUUIFFRVJQNFOUGSPN
the electrical outlet (receptacle) when not
in use, or while performing service, repair,
or cleaning.
t4FSWJDFPSSFQBJS.645CFQFSGPSNFEPOMZ
by trained and qualified technician.
t5VSOPGGBOEVOQMVH EJTDPOOFDU#&'03&
cleaning, servicing, or repair. NEVER
attempt to clean, service, or repair unless
the equipment is completely unplugged.
The person performing the cleaning, ser-
vice, or repair MUST keep the GFCI plug
under his exclusive control.
t%POPUBUUFNQUUPPQFOUIF$POUSPM6OJU
or Fuser case (housing). There are no
serviceable parts inside the Control Unit
or Fuser.
t0OMZVTFBVUIPSJ[FEBOENBOVGBDUVSFS
recommended repair and replacement
parts.
t,FFQFRVJQNFOU FTQFDJBMMZ'VTFSDPOUBDU
surfaces) clean and dry.
t%POPUDMFBOFRVJQNFOUXJUIBCSBTJWF
caustic, or harsh cleaning fluid or chemi-
cals. Use only water with mild soap. Dry
with soft, clean cloth.
t%FWFMPQBQFSJPEJDNBJOUFOBODFTDIFEVMF
for this equipment.
t4UPSFFRVJQNFOUJOBDMFBOTBGFBOE
secure place, out of reach of children and
unauthorized personnel or workers.
!
Important Safety Information
