11
Assembly
Attach Power Cord
Operating Instructions
t#&'03&FBDIVTFDBSFGVMMZDIFDLUIF
condition of the equipment. Do not use
if damaged in any way. Do not use if any
parts are missing.
t3FWJFXUIFFRVJQNFOUBTTFNCMZBOE
make sure all connections are proper and
secure.
t*OTQFDUUIF1PXFS$PSEBOEQMVHDPOGJSN
that the electrical outlet is the correct
rating and properly grounded, and test
operation of GFCI plug.
t.BLFTVSFUIBUXPSLBSFBJTDMFBOXFMM
lit, free of clutter, with no distractions, and
accessible only by authorized personnel
and workers.
t.BLFTVSFUIF$POUSPM6OJUJTGJSNMZPOUIF
ground or other stable work surface. Do
not place on ladder or shelf.
NOTICE
Make sure power (On/Off) switch on
Control Unit is in Off position.
WARNING
!
BEFORE each use review
UIJT.BOVBMFTQFDJBMMZ
the Important Safety
Information. Do not use the
equipment unless you are familiar with
safe and proper operation.
Equipment Setup & Usage Instructions
Attach Fuser
NOTE: Fusers for use with TRITON are sold separately.
t1VTIUIFPUIFSFOEPGUIF'VTFS$PSE
onto the selected Fuser as shown. Make
sure the jaws on the Fuser are closed.
Attach Fuser Cord
t-PDBUFUIF'VTFS$PSE5IF'VTFS$PSE
has connectors on each end.
t-PDBUFUIF'VTFS$PSEUFSNJOBMPOUIF
side of the Control Unit. Push one end of
Fuser Cord securely into terminal.
t-PDBUFUIF1PXFS$PSE5IF1PXFS$PSE
has a GFCI plug on one end and a female
connector on the other end.
t-PDBUFUIF1PXFS$PSESFDFQUBDMFPOUIF
Control Unit.
t*OTFSUUIFGFNBMFFOEPGUIF1PXFS$PSE
into the Power Cord receptacle on back
of unit as shown. Push female end of
Power Cord into receptacle securely.
STEP 1
STEP 2
STEP 3
