12
Operational Test and Start-up Diagnostics
Turn on Control Unit
t1MVH$POUSPM6OJUJOUPHSPVOEFE
110/120VAC electrical outlet (receptacle).
t5PHHMFQPXFSTXJUDIUP0OQPTJUJPO
t5IF$POUSPM6OJUEJTQMBZTIPVMESFBE
“Fuser Found!”
t*GUIF$POUSPM6OJUEJTQMBZSFBETi'VTFS
Error” alternating with “Check Fuser and
Cable Connection” then double check the
connections to ensure they are secure.
t5IF'VTFSKBXTNVTUCFDMPTFEUPJOJUJBUF
calibration. If the display reads “Please
Close Fuser Jaw” then close the Fuser
jaws by depressing fuser lever tongue.
t5IF$POUSPM6OJUXJMMDIJSQVOUJMUIFDBMJCSB
-
tion process starts.
A
Fuser Button
NOTICE
BEFORE plugging Power Cord into
electrical outlet (receptacle) make
sure power (On/Off) switch is in Off
position.
Equipment Setup & Usage Instructions
Calibrate Fuser
t%FQSFTT'VTFS#VUUPOBTTIPXO "GPS
approximately 2 seconds and release.
This allows the Control Unit to recognize
the Fuser’s size and profile.
t8IFOSFBEZUIF$POUSPM6OJUEJTQMBZ
ready button will turn green. When
ready the Control Unit display will read
“Fuser Ready to Start” alternating with
“Assemble Fitting & Attach Fuser.”
STEP 1
STEP 2