WattAge Thermalaire EP RTF Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 28

WattAge Thermalaire EP RTF Скачать руководство пользователя страница 7

7

For more cool and exciting Wattage products, visit our website at http://watt-age.globalhobby.com

Step 3: Charging the Flight Battery

WARNING

Before charging the flight battery, please read and completely understand the operating instructions that were provided
with your battery charger. Failure to follow those guidelines could result in injury to yourself or damage the charger
and/or battery pack.

❑

Connect the power leads from your charger to its power source.

❑

Plug the flight battery connector into the battery

charger connector. When plugged in properly you should
hear the connectors "click" together.

Note that the plugs can be plugged in only one way.

IMPORTANT

We strongly suggest periodically checking the temperature of the flight battery during charging. If the battery gets hot, it
is fully charged and should be removed from the charger immediately.

❑

After charging is completed, remove the battery from the charger, then remove the charger from its power source.

You must squeeze the tab on the charger connector to be able to pull the two connectors apart.

Step 4: Assembling the Wing Panels

❑

Carefully line up one of the

longer

steel wing joiners

with the

forward

hole in one end of the center wing panel.

The center wing panel is the longest of the three wing

panels.

«
...
5
6
7
8
9
...
»

Содержание Thermalaire EP RTF





























Отзывы:

Нет отзывов