WattAge Thermalaire EP RTF Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 28

WattAge Thermalaire EP RTF Скачать руководство пользователя страница 19

19

For more cool and exciting Wattage products, visit our website at http://watt-age.globalhobby.com

❑

Looking from the back of the airplane, move the transmitter

control stick completely back. The horizontal control surface
should move up.

❑

Looking from the back of the airplane, move the transmitter

control stick completely forward. The horizontal control surface
should move down.

Step 2: Testing the Motor

WARNING:

During the motor test keep everything clear

of the propeller, especially fingers and loose clothing.

❑

While holding the airplane upright in the air

with the

propeller pointing away from you

, slide the throttle con-

trol lever completely to the right. The propeller should
spin at a high rate of speed.

❑

When finished with the test, slide the throttle control

lever completely to the left; the motor should turn off.
Turn off the airborne system, then turn off the transmitter.

«
...
17
18
19
20
21
...
»

Содержание Thermalaire EP RTF





























Отзывы:

Нет отзывов