WATT MIGNON6, Руководство пользователя

Страница: 54 / 97

page 2 of 42
Norms and declarations of conformity
Our company declares that the stove conforms to
the following norms for the EC European Directive
labelling:
• 2014/30 UE (regulation EMCD) and following
amendments;
• 2014/35UE(LowVoltageDirective)andfollowing
amendments;
• 2011/65 EU (RoHS 2 directive);
• 2015/863 EU (delegated directive recently
amended Annex II of the Directive 2011/65 EU);
• Ecodesign directive 2009/125/EC;
• The Rules of Construction Products (CPR-
Construction Products Regulation) No.
305/2011 regarding the construction world;
• For installations in Italy, please refer to UNI
10683/98 or following changes.
While
installing the unit respect the local,
national and Europen rules;
• EN 55014-1; EN 55014-2; EN 61000-3-2; EN
61000-3-3; EN 60335-1; EN 60335-2-102; EN
62233, EN 50581. Regulation EU 2015/1185.
Safety information
Please carefully read this use and maintenance
manual before installing and operating the stove!
If clarification is needed, please contact the dealer
or the Authorized Assistance Center.
• The pellet stove must only be operated in living
environments. This stove, being controlled by an
electronic board, permits a completely automatic
and controlled combustion; the exchange, in fact,
regulates the lighting phase, 5 power levels and the
shut down stage, guaranteeing the safe operation
of the stove.
• The basket used for combustion allows most
of the ash produced by the combustion of the
pellets to fall into the collection compartment.
Nevertheless, check the basket daily, given that
not all pellets have high quality standards (use only
quality pellets recommended by the manufacturer)
.
Responsibility
With the delivery of the present manual, we
decline all responsibility, both civil and penal, for
accidents deriving from the partial or total lack of
observance of the instructions contained herein.
We decline every responsibility derived from
improper use of the stove, from incorrect use by
the user, from unauthorized modifications and/
or repairs, from the use of replacement parts that
are not original for this model. The manufacturer
declines every civil or penal, direct or indirect
responsibility due to:
• Lack of maintenance;
• Failure to observe the instructions contained in
the manual;
• Use in non-conformity with the safety directives;
• Installation in non-conformity with the norms in
force in the country;
• Installation by unqualified or untrained personnel;
• Modifications and repairs not authorized by the
manufacturer;
• Use of non-original replacement parts;
• Exceptional events.
INFORMATION:
This symbol is used to highlight information which is important for proper stove operation.
Failure to comply with these provision will compromise use of the stove and its operation
will not be satisfactory.
ATTENTION:
This warning sign indicates that the message to which it refers should be carefully read
and understood,
because failure to comply with what these notices say can cause
serious damage to the stove and put the
user’s safety at risk.
EN