WATT MIGNON6, Руководство пользователя

Страница: 82 / 97

page 30 of 42
Maintenance and cleaning of the stove Mod. 8 - 10 - 12
Before effecting any maintenance operation or cleaning on the stove, take the following precautions:
• Be sure that all parts of the stove are cold.
• Be sure that the ashes are completely cold.
• Be sure that the general switch is in the “OFF” position.
• Be sure that the plug is pulled out of the socket to avoid accidental contact.
• Once the maintenance phase is completed check that everything is in order as per before the
intervention (the brazier is placed correctly).
Cleaning the brazier and brazier support
When the flame assumes a red colour or seems weak, and is
accompanied by black smoke, this means that there are ash deposits
or incrustations that do not permit the correct functioning of the stove
and that must be removed (Pict. 11). Remove the brazier every day by
simply raising it from its slot; then clean out the ashes and eventual
incrustations that may have formed, paying particular attention to
liberating the holes by using a pointed tool (not included with the
stove). This operation is made particularly necessary before every
lighting the first several times and above all if using pellets that differ
from those supplied by our company. The frequency of this operation
is determined by how frequently the stove is used and the choice of
pellets. It is also a good idea to check the brazier support, vacuuming
the eventual ash present.
Daily cleaning with a scraper (if supplied)
With the stove shut down and chill, activate the scraper in the heat exchange ducts by pushing and
pulling the lever, located between the frontal grates where the environmental air exits, backwards
and forwards 5 or 6 times.
• Push the scraper towards the stove with the door closed (Pict. 12).
• Pull the scraper outwards with the door closed (Pict. 13).
Pict. 12: deactivated scraper Pict. 13: activated scraper
Follow carefully the following cleaning instructions. Failure to follow these
instructions could create problems with the operation of the stove.
EN