WATT MIGNON6, Руководство пользователя

Страница: 69 / 97

page 17 of 42
Program 1 (ON1 and OFF1)
Automatic switching on ON1
Please join the following procedure to set the time
for the automatic switching on according to the
program 1:
Press the key (1). You will see the hours and
minutes and the symbol ON1 blinking on the
remote control. Use the keys (2) and (3) to
change the wished time (intervals of 10 minutes).
To scroll the time faster, keep the keys (2) and
(3) pressed. Confirm your selection pressing
the key (1) once again. You will now read
the set switching on time on the remote control.
Press SEND (4) to transmit your selection to the
pcb of the stove. The LED chrono-thermostat will
light up on the control board indicating that the
programming is on (5).
ON 1
4
2
3
1
Automatic switching off OFF1
Press the key (1). You will see the hours and
minutes and the symbol OFF1 blinking on the
remote control. Use the keys (2) and (3) to
change the wished time (intervals of 10 minutes).
To scroll the time faster, keep the keys (2) and
(3) pressed. Confirm your selection pressing
the key (1). once again. You will now read the
set switching off time on the remote control. Press
SEND (4) to transmit your selection to the pcb of the
stove. The LED chrono-thermostat will light up on
the control board indicating that the programming
is on (5). The LED chronothermostat switches off
as soon as the automatic switching on and off are
completed. The remote control does not show the
previously set time schedule anymore.
OFF1
4
2
3
1
• The time of the automatic switching on and off must be set when the remote
control is Off;
• In the event of an even very short lack of current, you will miss the set time
for the automatic switching on or off. Once the power supply is back, please program
the stove again using the remote control;
• The stove switching on at the scheduled time will keep the same temperature and
power you set before you last switched it off;
• Please consider an interval of min. 20 minutes between the switching off and subse-
quent switching on of the stove. In this way the unit will have time to arrange a com-
plete cooling phase; in the event this minimal interval is not calculated, the stove will
not switch on as scheduled.
ON 1
2
3
4
1
5
OFF1
2
3
4
1
EN