Waterstage WO*A060LDC Series, Дизайн и техническое руководство

Страница: 74 / 139

- (CS01 - 27) -
Control system
- (CS01 - 27) -
C
O
N
TR
O
L
SY
ST
EM
C
O
N
TR
O
L
SY
ST
EM
Reduced Setpoint Increase
LINE FUNCTION
HC1 HC2
800 1100 Reduced setpoint increase start
801 1101 Reduced setpoint increase end
This function is used mainly in heating installations
that do not have high supplies of power (e.g. low
power use homes). When outdoor temperatures are
low, adjusting the temperature would take too long.
Increasing the reduced setpoint prevents excessive
cooling of the rooms in order to shorten the
temperature adjustment period when changing over
to the comfort setpoint.
Comfort
setpoint(710)
Start
increase(800)
End increase
(801)
Composite OT
Reduced
setpoint(712)
Mixing Valve Control
LINE FUNCTION
HC1 HC2
830 1130 Mixer valve boost
834 1134 Actuator running time
Mixer valve boost
The controller adds the increase set here to the
current flow setpoint and uses the result as the
temperature setpoint for the heat generator.
Actuator running time
For the 3-position servomotor, the travel time can
be adjusted. With a 2-position servomotor,
the adjusted travel time is inoperative.
Controlled floor drying function
LINE FUNCTION
HC1 HC2
850 1150 Floor curing function
851 1151 Floor curing setpoint manually
856 1156 Floor curing day current
857 1157 Floor curing day completed
This function is used in the controlled drying of floors.
It adjusts the flow temperature to a temperature
profile. Drying is performed by floor heating via the
heating circuit with a mixing valve or with a pump.