Waters 2998, Обзор и руководство по обслуживанию

Страница: 6 / 94

December 5, 2017, 715004753 Rev. B
Page vi
Audience and purpose
Tis guide is intended for personnel who install, operate, and maintain the Waters 2998 Photodiode
Array (PDA) detector.
Intended use of the 2998 Photodiode Array Detector
Waters designed the 2998 PDA detector to analyze and monitor various types of compounds. The
2998 PDA detector is not intended for use with in vitro diagnostic applications.
Calibrating
To calibrate LC systems, follow acceptable calibration methods using at least five standards to
generate a standard curve. The concentration range for standards must include the entire range of
QC samples, typical specimens, and atypical specimens.
Quality control
Routinely run three QC samples that represent subnormal, normal, and above-normal levels of a
compound. If sample trays are the same or very similar, vary the location of the QC samples in the
trays. Ensure that QC sample results fall within an acceptable range, and evaluate precision from
day to day and run to run. Data collected when QC samples are out of range might not be valid. Do
not report these data until you are certain that the instrument performs satisfactorily.
Confirms that a manufactured product complies with all applicable
United States and Canadian safety requirements
Consult instructions for use
Alternating current
Electrical and electronic equipment with this symbol may contain
hazardous substances and should not be disposed of as general
waste.
For compliance with the Waste Electrical and Electronic Equipment
Directive (WEEE) 2012/19/EU, contact Waters Corporation for the
correct disposal and recycling instructions.
Serial number
Part number catalog number
Symbol Definition
5()