Watchguard Firebox X20E, Руководство пользователя

Страница: 175 / 310

User Guide 163
Using LDAP/Active Directory Authentication
3
Select the Enable LDAP authentication check box. If user authentication is not enabled in the
top section of this configuration page, the LDAP Authentication Service section is not active.
4
In the Domain Name text box, type the name of the LDAP domain. Do not include the top-level
domain.
5
From the LDAP server type drop-down list, select the type of LDAP implementation you use in
your organization: Active Directory or Standard LDAP .
6
In LDAP Server Address text box, type the IP address of the LDAP server the Firebox X Edge will
use for authentication requests. The LDAP server can be located on any Edge interface or
available through a VPN tunnel.
7
In the LDAP Server Port text box, type the port number the Firebox X Edge will use for
connections to the LDAP server. The default LDAP server port number is 389. Usually you do not
have to change this number.
8
Use the LDAP Timeout drop-down list to select the number of seconds to use as a timeout for
any LDAP operation.
9
In the Search Base text box, type the base in the LDAP directory to start the search for user
account entries. This must be a legitimate LDAP DN (Distinguished Name). A Distinguished
Name is a name that uniquely identifies an entry in an LDAP directory. A DN includes as many
qualifiers as it must to find an entry in the directory. For example, a DN can look like this:
ou=user accounts,dc=mycompany,dc=com
You can find more information about how to find your search base at www.watchguard.com/
support/faq .
10
If you select Standard LDAP as the LDAP server type, you must enter a Login Attribute Name
and Group Attribute Name in the appropriate text boxes. These text boxes do not appear if you
select Active Directory as the LDAP server type.
The
Login Attribute Name is the name of the login name attribute of user entries in the LDAP