Watchguard Firebox X20E, Руководство пользователя

Страница: 157 / 310

User Guide 145
Working with Firewall NAT
4
To add a custom packet filter policy, click Add Packet Filter Policy .
To add a custom SMTP proxy policy, click Add Incoming Proxy Policy .
To add a custom HTTP, POP3, or FTP proxy policy, click Add Outgoing Proxy Policy .
5
Use the instructions in Chapter 7, “Firewall Policies” and Chapter 8, “Proxy Settings” to configure
the settings for your custom policy.
Removing a 1-to-1 NAT entry
1
To connect to the System Status page, type https:// in the browser address bar, and the IP
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select Firewall > NAT .
The NAT (Network Address Translation) page appears.
3 Select the 1-to-1 NAT entry you want to delete, and then click Remove .
The entry is removed from the Secondary IP Addresses list.
Enabling 1-to-1 NAT
1
To connect to the System Status page, type https:// in the browser address bar, and the IP
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select Firewall > NAT .
The NAT (Network Address Translation) page appears.
3
Select the Enable secondary IP addresses check box.
4
Click Submit . 1-to-1 NAT is now enabled.