Watchguard Firebox FireboxTM System 4.6, Руководство пользователя

Страница: 49 / 170

User Guide 39
Defining a host route
Defining a host route
Configure a host route if there is only one host behind the router. Enter the IP address
of that single, specific host, and do not enter a bitmask. From Policy Manager in the
Advanced view:
1 Select Network => Routes .
The Setup Routes dialog box appears.
2 Click Add .
The Add Route dialog box appears.
3 Click the Host option.
4 Enter the host IP address.
5 In the Gateway text box, enter the route gateway.
Be sure to specify a route IP address that is on the same network as the Firebox.
6 Click OK .
The Setup Routes dialog box lists the newly configured host route.
7 Click OK .
The route data is written to the configuration file.
Changing an interface IP address
The IP addresses of the three Firebox interfaces are generally configured using the
QuickSetup Wizard. However, if you need to modify an interface address, you can do
so manually. From Policy Manager:
1 Select Network => Configuration .
The Network Configuration dialog box appears.
2 Click the tab of the interface requiring modification.
3 In the IP Address text box, type the interface address in slash notation.
Setting the default gateway
The default gateway is generally configured using the QuickSetup Wizard. However,
if you need to modify the default gateway, you can do so manually. From Policy
Manager:
1 Select Network => Default Gateway .
2 Enter the IP address of the default gateway.
3 Click OK .