W&T 58031, Руководство пользователя

Страница: 201 / 217

201
W&T
Appendix
Subject to error and alteration
Now turn the Com-Server on and off to reset it and while it is
starting up hold down the „x“ key (lower case, no Caps Lock!).
After about 2-3 seconds the prompt
IP no.:+<ENTER>: will
appear in the terminal window.
Now enter the IP address you want to assign in the usual dot
notation (e.g. 172.17.10.10). There will be no immediate
echo of characters, so the individual inputs will not be seen
on the monitor. Only after you have pressed Return to
confirm is the completely entered IP address returned by the
Com-Server.
Each separated by a comma, this method can also be used
to assign subnet mask and gateway address.
Example 1
Assigning only the IP address:
172.15.222.5 <ENTER>
Example 2
Assigning IP address, Subnet Mask, Gateway:
172.15.222.5,255.255.0.0,172.15.222.1 <ENTER>
Example 3
Assigning IP address, Subnet Mask, Gateway and deactivating
BOOTP at the same time:
172.15.222.5,255.255.0.0,172.15.222.100-1 <ENTER>
Example 4
Assigning IP-Address, Subnet Mask, Gateway , deactivating
BOOTP and activating Web Based Management on TCP-Port 80
at the same time
172.15.222.5,255.255.0.0,172.15.222.100-1+w80 <ENTER>
1
If you have made improper entries or typing mistakes,
the Com-Server will return FAIL followed by its actual
current IP address. The procedure must then be repeated.