manualshive.com logo in svg

W&T 58031, Руководство пользователя, Страница: 199 / 217

Поделиться
Скачать
W&T 58031 Скачать руководство пользователя страница 199

199

W&T

Appendix

Subject to error and alteration

the TCP ports 8003 and 8004 used for this are protected by
the system password.

•

Com-Server Reset and Port Reset

(see section on 

Reset Com-Server-Port

 and 

Reset the Com-

Servers

)

The TCP ports 8888, 9084, 9184, 9284 and 9384 allow
for resetting of fixed modes of a port and for fully
r e s e t t i n g   t h e   C o m - S e r v e r .   A l l   t h e   p o r t s   a r e   n o t
configurable and are protected by the system password.

•

Controlport

(see section on 

The Control Port

)

The TCP control ports (factory defaults 9094, 9194, 9294
and 9394) allow the COM port redirector as well as a
customer’s own applications to configure the serial
transmission parameters and control lines of the individual
serial ports on a Com-Server. All ports are protected by the
system password.

Содержание 58031


























































































































































































































Отзывы:

Нет отзывов