W&T 58031, Руководство пользователя

Страница: 144 / 217

144
W&T
Data transfer per FTP
occurrence of the protocol character in the data stream will
be ignored. The only possibility for a disconnection in this
case is by way of an inactivity timeout.
Format: decimal
Once you have entered all the parameters in the Com-Server
port menu, press the ENTER key several times to return to the
main menu and save the entries with
SAVE Setup . The message
Saving... appears, then the FDP client mode is activated. The
entry FTP-Client now appears in the SETUP Port x
r
Port State
r
Connection State menu. The current status of the connection
can be read in this menu at any time.
Opening the FTP connection
After saving the configuration data the Com-Server waits to
receive a valid serial login string in the following format.
In serial generation of the login string, the individual
commands are separated from each other by a linefeed (0x0a).
The character configured under Protocol Char must be sent as
a terminator. When entering via keyboard, the character can be
generated by pressing CTRL J. This results in the 3 following
formats for the login string:
login<lf>
password<lf>
TYPE I or TYPE A<lf>
STOR, RETR, APPE oder LIST dir/remote file<lf>
<Protocol Char>
login<lf>
password<lf>
DELE dir/remote file<lf>
<Protocol Char>
RESET<lf>
<Protocol Char>
1
Please note capitalization of the commands. A maximum
of 128 characters are available for the complete login
string!